|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
INTEGRATED CIRCUITS 74F365, 74F366*, 74F367, 74F368* Buffers/drivers * Discontinued part. Please see the Discontinued Product List. Product specification Supersedes data of 1990 Jan 08 IC15 Data Handbook 1999 Jan 08 Philips Semiconductors Philips Semiconductors Product specification Buffers/drivers 74F365, 74F367 Hex Buffer/Driver (3-State) 74F366, 74F368 Hex Inverter Buffer/Driver (3-State) FEATURES 74F365, 74F366* 74F367, 74F368* * High-impedance NPN base inputs for reduced loading (20A in High and Low states) TYPE 74F365, 74F367 74F366, 74F368 TYPICAL PROPAGATION DELAY 5.0ns 5.0ns TYPICAL SUPPLY CURRENT (TOTAL) 36mA 33mA * High-speed * Bus oriented * 3-State buffer outputs sink 64mA ORDERING INFORMATION COMMERCIAL RANGE DESCRIPTION 16-pin plastic DIP 16-pin plastic SO VCC = 5V 10% 10%, Tamb = 0C to +70C N74F365N, N74F367N N74F365D, N74F367D PKG DWG # SOT38-4 SOT109-1 INPUT AND OUTPUT LOADING AND FAN-OUT TABLE PINS I0 - I5 OE0, OE1 DESCRIPTION Inputs Output enable inputs (active Low) 74F(U.L.) HIGH/LOW 1.0/0.033 1.0/0.033 LOAD VALUE HIGH/LOW 20A/20A 20A/20A 15mA/64mA Y0 - Y5, Y0 - Y5 Data Outputs 750/106.7 NOTE: One (1.0) FAST Unit Load (U.L.) is defined as: 20A in the High state and 0.6mA in the Low state. PIN CONFIGURATION 74F365 OE0 1 I0 Y0 I1 Y1 I2 Y2 GND 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC OE1 I5 Y5 I4 Y4 LOGIC SYMBOL (IEEE/IEC) 74F365 1 15 & EN 2 4 6 10 3 5 7 9 11 13 I3 12 Y3 14 SF00899 SF00901 LOGIC SYMBOL 74F365 2 4 6 10 12 14 PIN CONFIGURATION 74F366 OE0 1 I0 I0 I1 I2 I3 I4 I5 Y0 I1 Y1 Y1 Y2 Y3 Y4 Y5 I2 Y2 GND 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC OE1 I5 Y5 I4 Y4 I3 Y3 1 15 OE0 OE1 Y0 VCC = Pin 16 GND = Pin 8 3 5 7 9 11 13 SF00900 SF00902 * Discontinued part. Please see the Discontinued Products List. 1999 Jan 08 2 853-0042 20616 Philips Semiconductors Product specification Buffers/drivers 74F365, 74F366* 74F367, 74F368* LOGIC SYMBOL 2 4 74F366 6 10 12 14 LOGIC SYMBOL 74F367 2 4 6 10 12 14 I0 1 15 OE0 OE1 Y0 I1 I2 I3 I4 I5 1 15 OE0 I0 I1 I2 I3 I4 I5 OE1 Y0 Y1 Y2 Y3 Y4 Y5 Y1 Y2 Y3 Y4 Y5 VCC = Pin 16 GND = Pin 8 3 5 7 9 11 13 VCC = Pin 16 GND = Pin 8 3 5 7 9 11 13 SF00903 SF00906 LOGIC SYMBOL (IEEE/IEC) 74F366 1 15 & EN LOGIC SYMBOL (IEEE/IEC) 74F367 1 15 EN1 EN2 2 4 6 10 12 14 3 5 7 9 11 13 2 4 6 10 12 14 1 3 5 7 9 2 11 13 SF00904 SF00907 PIN CONFIGURATION 74F367 OE0 1 I0 Y0 I1 Y1 I2 Y2 GND 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC OE1 I5 Y5 I4 Y4 I3 Y3 PIN CONFIGURATION 74F368 OE0 1 I0 Y0 I1 Y1 I2 Y2 GND 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC OE1 I5 Y5 I4 Y4 I3 Y3 SF00905 SF00908 * Discontinued part. Please see the Discontinued Products List. 1999 Jan 08 3 Philips Semiconductors Product specification Buffers/drivers 74F365, 74F366* 74F367, 74F368* LOGIC SYMBOL 74F368 2 4 6 10 12 14 LOGIC SYMBOL (IEEE/IEC) 74F368 1 15 EN1 EN2 I0 1 15 OE0 OE1 Y0 I1 I2 I3 I4 I5 2 4 6 1 3 5 7 9 Y1 Y2 Y3 Y4 Y5 10 12 14 2 11 13 VCC = Pin 16 GND = Pin 8 3 5 7 9 11 13 SF00909 SF00910 LOGIC DIAGRAMS 74F365 OE0 1 OE1 15 3 OE0 1 OE1 15 3 74F366 OE0 1 74F367 OE0 1 74F368 I0 2 Y0 I0 2 Y0 I0 2 3 Y0 I0 2 3 Y0 I1 4 5 Y1 I1 4 5 Y1 I1 4 5 Y1 I1 4 5 Y1 I2 6 7 Y2 I2 6 7 Y2 I2 6 7 Y2 I2 6 7 Y2 I3 10 9 Y3 I3 10 9 Y3 I3 10 OE1 15 9 Y3 I3 10 OE1 15 9 Y3 I4 12 11 Y4 I4 12 11 Y4 I5 14 13 Y5 I5 14 13 Y5 I4 12 11 Y4 I4 12 11 Y4 I5 14 VCC = Pin 16 GND = Pin 8 13 Y5 I5 14 13 Y5 SF00911 FUNCTION TABLE for 74F365 and 74F366 INPUTS OE0 OE1 In L H X X L L L L X H H X High voltage level Low voltage level Don't care High impedance "off" state L H Z Z OUTPUTS Yn Yn H L Z Z FUNCTION TABLE for 74F367 and 74F368 INPUTS OEn In Yn L H Z L L L H H X High voltage level Low voltage level Don't care High impedance "off" state OUTPUTS Yn H L Z H L X Z = = = = H L X Z = = = = * Discontinued part. Please see the Discontinued Products List. 1999 Jan 08 4 Philips Semiconductors Product specification Buffers/drivers 74F365, 74F366* 74F367, 74F368* ABSOLUTE MAXIMUM RATINGS (Operation beyond the limits set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.) SYMBOL VCC VIN IIN VOUT IOUT Tamb TSTG Supply voltage range Input voltage range Input current range Voltage applied to output in High output state range Current applied to output in Low output state Operating free-air temperature range Storage temperature range PARAMETER RATING -0.5 to +7.0 -0.5 to +7.0 -30 to +5 -0.5 to 5.5 128 0 to +70 -65 to +150 UNIT V V mA V mA C C RECOMMENDED OPERATING CONDITIONS SYMBOL VCC VIH VIL IIK IOH IOL Tamb Supply voltage High-level input voltage Low-level input voltage Input clamp current High-level output current Low-level output current Operating free-air temperature range 0 PARAMETER LIMITS MIN 4.5 2.0 0.8 -18 -15 64 70 TYP 5.0 MAX 5.5 V V V mA mA mA oC UNIT * Discontinued part. Please see the Discontinued Products List. 1999 Jan 08 5 Philips Semiconductors Product specification Buffers/drivers 74F365, 74F366* 74F367, 74F368* DC ELECTRICAL CHARACTERISTICS Over recommended operating free-air temperature range unless otherwise noted. LIMITS SYMBOL PARAMETER TEST CONDITIONSNO TAG "10%VCC "5%VCC "10%VCC "5%VCC "10%VCC "5%VCC 0.42 -0.73 MIN 2.4 2.7 2.0 2.0 0.55 0.55 -1.2 100 20 -20 50 -50 -100 25 VCC = MAX 47 35 18 VCC = MAX 47 35 -225 35 62 48 25 62 48 3.3 TYP NO TAG UNIT MAX V V V V V V V A A A A A mA mA mA mA mA mA VCC = MIN, VIL = MAX, VIH = MIN, IOH = -3mA VO OH High-level High level output voltage VCC = MIN, VIL = MAX, VIH = MIN, IOH = -15mA VO OL VIK II IIH IIL IOZH IOZL IOS Low-level Low level output voltage Input clamp voltage Input current at maximum input voltage High-level input current Low-level input current Off-state output current, High-level voltage applied Off-state output current, Low-level voltage applied Short-circuit output currentNO TAG ICCH 74F365 74F367 ICC Supply current (total) 74F366 74F368 ICCL ICCZ ICCH ICCL ICCZ VCC = MIN, VIL = MAX, VIH = MIN, IOL = MAX VCC = MIN, II = IIK VCC = 0.0V, VI = 7.0V VCC = MAX, VI = 2.7V VCC = MAX, VI = 0.5V VCC = MAX, VO = 2.7V VCC = MAX, VO = 0.5V VCC = MAX mA NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25C. 3. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last. AC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITIONS TA = +25C VCC = +5.0V CL = 50pF, RL = 500 MIN tPLH tPHL tPLH tPHL tPZH tPZL tPZH tPZL tPHZ tPLZ Propagation delay In to Yn Propagation delay In to Yn Output Enable time to High or Low level Output Enable time to High or Low level Output Disable time from High to Low level 74F366, 74F368 74F365, 74F367 74F365, 74F366 74F367, 74F368 Waveform 1 Waveform 2 Waveform 3 Waveform 4 Waveform 3 Waveform 4 Waveform 3 Waveform 4 3.0 2.0 2.5 2.5 2.5 2.5 3.0 3.0 2.0 2.0 TYP 5.0 3.0 4.5 5.5 4.0 5.0 5.5 6.5 4.5 4.0 MAX 6.5 5.0 6.5 7.0 6.5 8.0 7.5 8.5 6.5 6.5 TA = -55C to +125C VCC = +5.0V 10% CL = 50pF, RL = 500 MIN 3.0 1.5 2.0 2.0 2.5 2.5 3.0 3.0 2.0 2.0 MAX 7.5 5.5 7.0 7.5 7.5 8.5 8.5 9.0 7.0 7.0 ns ns ns ns ns ns ns ns ns ns UNIT * Discontinued part. Please see the Discontinued Products List. 1999 Jan 08 6 Philips Semiconductors Product specification Buffers/drivers 74F365, 74F366* 74F367, 74F368* AC WAVEFORMS For all waveforms, Vm = 1.5V In VM tPHL Yn VM VM tPLH Yn VM In VM tPLH VM VM tPHL VM SF00912 SF00914 Waveform 1. For Inverting Outputs Waveform 2. For Non-Inverting Outputs OE VM tPZH VM tPHZ VM 0V VOH -0.3V OE VM tPZL VM VM tPLZ 3.5V Yn, Yn Yn, Yn SF00913 VOL +0.3V Waveform 3. 3-State Output Enable Time to High Level and Output Disable Time from High Level SF00915 Waveform 4. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level TEST CIRCUIT AND WAVEFORM VCC 7.0V VIN PULSE GENERATOR RT D.U.T. VOUT RL NEGATIVE PULSE 90% VM 10% tTHL (tf ) CL RL tTLH (tr ) 90% POSITIVE PULSE 10% tTHL (tf ) AMP (V) 90% VM tw 10% 0V tw VM 10% tTLH (tr ) 0V AMP (V) 90% Test Circuit for 3-State Outputs SWITCH POSITION TEST tPLZ tPZL All other SWITCH closed closed open VM Input Pulse Definition DEFINITIONS: RL = Load resistor; see AC electrical characteristics for value. CL = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. RT = Termination resistance should be equal to ZOUT of pulse generators. INPUT PULSE REQUIREMENTS family amplitude VM 74F 3.0V 1.5V rep. rate 1MHz tw 500ns tTLH 2.5ns tTHL 2.5ns SF00777 * Discontinued part. Please see the Discontinued Products List. 1999 Jan 08 7 Philips Semiconductors Product specification Buffers/drivers 74F365, 74F366*, 74F367, 74F368* DIP16: plastic dual in-line package; 16 leads (300 mil) SOT38-4 * Discontinued part. Please see the Discontinued Product List. 1999 Jan 08 8 Philips Semiconductors Product specification Buffers/drivers 74F365, 74F366*, 74F367, 74F368* SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1 * Discontinued part. Please see the Discontinued Product List. 1999 Jan 08 9 Philips Semiconductors Product specification Buffers/drivers 74F365, 74F366*, 74F367, 74F368* Data sheet status Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production [1] Please consult the most recently issued datasheet before initiating or completing a design. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Document order number: Date of release: 10-98 9397-750-05118 * Discontinued part. Please see the Discontinued Product List. Philips Semiconductors yyyy mmm dd 10 |
Price & Availability of 74F367 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |